How to Install the WELOCK Touch61 Smart Lock Easily

Installing a new smart lock is one of the most advantageous home improvements you can do. For both residential and business owners, smart locks offer a number of advantages. In addition to providing a convenient way to check people in and out, smart locks let you manage access to your property even when you're not there.

Installing the WELOCK Touch61 Smart Lock is quick and straightforward. We'll look at how to install a smart door lock on your house in this article.

Step 1: Insert the Smart Cylinder Begin by placing the WELOCK Touch61 smart cylinder from the interior side of the door to the exterior. Secure the cylinder with screws to prevent operational issues.

Step 2: Attach the Rear Handle Once the cylinder is in place, mount the rear handle. Use the provided screws to firmly attach both the cylinder and handle. Ensure screws are tight to avoid loosening over time.

Step 3: Install the Front Handle The front handle installation is simple: first, attach it to the lock cylinder, then secure the mounting bracket, and finally, turn the handle to complete the installation.

Step 4: Tightening the Communication Shaft Screws to Prevent Communication Failure
The sophisticated internal and exterior communication mechanism of the WELOCK Touch61 is one of its primary features. When aligning the communication shaft, listen for a distinct "click" to avoid communication breakdowns. As soon as you hear the "click," fasten the communication shaft with the proper screws. This guarantees that the lock functions dependably and that the electronics communicate correctly.

Step 5: Insert and Secure the Battery Box Finish by installing the battery box. Insert 3 * AAA batteries correctly, then slide the battery box into the slot on the back of the front handle. Secure it with the included screws.

By following these instructions, you’ll successfully install your WELOCK Touch61 smart lock, enjoying its keyless entry and enhanced security features.